18" horizontal stripes painted with leftover bedroom paint and a new coat of gray. I did the gray in eggshell, so the walls wouldn't be complete shinny.
We can also recycle one of our old bedroom table lamps to light up our dark hallway.
Tuesday, November 30, 2010
If You Give a Mouse a Cookie...
...he'll re-do the hallway too.
18" horizontal stripes painted with leftover bedroom paint and a new coat of gray. I did the gray in eggshell, so the walls wouldn't be complete shinny.
We can also recycle one of our old bedroom table lamps to light up our dark hallway.
18" horizontal stripes painted with leftover bedroom paint and a new coat of gray. I did the gray in eggshell, so the walls wouldn't be complete shinny.
We can also recycle one of our old bedroom table lamps to light up our dark hallway.
Painting Gets Underway
The painting (and fumes) continue. I want to make our bedroom seem as big as possible, which means a lot of white. I'm being very cautious about not transitioning the cave feel of our previous style to a more asylum feel with a too-white interior.Everything below the rail (2/3 up the wall) will be white. Everything above will be blue. I'm going with Ozone by Behr. Both paints are from their ultra premium collection. The bead board ceiling is being painted with standard white ceiling paint.
Monday, November 29, 2010
Prime(r) Time
With the ceiling and the board and batten up, it was time to start the painting process. There were a couple challenges here. First, were the drywall patches that needed to be sealed. Second, was the dark green paint giving the bedroom its previous cave-dwelling mystique. Third, was the new woodwork. While beautiful, I used pine, which is loaded with sap-filled knots that will bleed through paint. The solution: lots of primer.
A first coat of primer covering all the newly-installed woodwork and some of the drywall patches. (A side note: I need to get better at taking pictures of each step of the process. The drywall patching was little involved).
More primer over the paint and woodwork. I used Killz low-fume primer. I really don't want to know what their high fume primer smells like because this stuff stinks. I had coffee beans, candles, open windows, and baking soda. It was still difficult to get the smell out.
Behind where our bed will be. This was the area with the most extensive wall damage.
Primer is depressing. After working all day, all I got was a kind of creepy white room.
A first coat of primer covering all the newly-installed woodwork and some of the drywall patches. (A side note: I need to get better at taking pictures of each step of the process. The drywall patching was little involved).
More primer over the paint and woodwork. I used Killz low-fume primer. I really don't want to know what their high fume primer smells like because this stuff stinks. I had coffee beans, candles, open windows, and baking soda. It was still difficult to get the smell out.
Behind where our bed will be. This was the area with the most extensive wall damage.
Primer is depressing. After working all day, all I got was a kind of creepy white room.
Thursday, November 25, 2010
Upward and Onward
Just like the walls, all of our ceilings are also original 1920's plaster. I knew the cracks in the ceiling would require repair even before I decided to re-do the entire bedroom. Frankly, the thought of trying to perfectly plaster the ceiling above my head is the reason why I delayed for months on this project.
In searching for a plaster alternative, I decided on beadboard. This was something used in old house ceilings, but typically in bathrooms and kitchens. TOH first gave me the idea to use it in the bedroom Here. I also really liked the sample photos at Nantucket Beadboard and Here.
Home Depot carries pine strips that are 12' long by about 8" wide. A cheaper alternative is the beadboard plywood; however, these only come in an 8 foot maximum length. Since the room is 10' x 12', there would have been seems everywhere.
I did two heavy coats of oil-based primer to ensure that all the knots in the wood were sealed. In some spots I did a skim coat of plaster, sanded, and the coated with Killz primer.
This was definitely a two person job, and one where the scaffold was a key tool. A nail gun made the job much easier.
In some spots the pieces wouldn't come together very easily. A rubber mallet moved things along.
It took about two weeks (tinkering after work) to get the boards cut, primed, and sanded. The original quality of the wood was not as good as I had hoped. Just putting up the beadboard took and entire day with two people.
In searching for a plaster alternative, I decided on beadboard. This was something used in old house ceilings, but typically in bathrooms and kitchens. TOH first gave me the idea to use it in the bedroom Here. I also really liked the sample photos at Nantucket Beadboard and Here.
Home Depot carries pine strips that are 12' long by about 8" wide. A cheaper alternative is the beadboard plywood; however, these only come in an 8 foot maximum length. Since the room is 10' x 12', there would have been seems everywhere.
I did two heavy coats of oil-based primer to ensure that all the knots in the wood were sealed. In some spots I did a skim coat of plaster, sanded, and the coated with Killz primer.
This was definitely a two person job, and one where the scaffold was a key tool. A nail gun made the job much easier.
In some spots the pieces wouldn't come together very easily. A rubber mallet moved things along.
It took about two weeks (tinkering after work) to get the boards cut, primed, and sanded. The original quality of the wood was not as good as I had hoped. Just putting up the beadboard took and entire day with two people.
Wednesday, November 24, 2010
Wednesday Widget
Yep, it's the Auto Wrench.
When I broke this bad boy out on a recent camping trip, everyone was amazed. Apparently, this was something that everyone had seen on TV, but never really thought it existed in real life.
I love this tool. It's a time saver and makes adjusting the wrench in tight places a whole lot easier.
After two year, I have only changed the single battery once. In addition, I've dropped it approximately 60 times and it keeps working.
Moving Along...
I'm having a bit of trouble being a good photographer during this process. Here I've screwed in the plaster washers, covered with drywall tape, and done two coats of plaster with sanding after each. After that, came more batten.
The batten is 2/3 of the way up the wall. The battens are about 14" spaced around the room. I wanted the spacing to be centered under the windows, so the widths are adjusted for each wall. My dad did the math to lay them out. It helps having an engineer handy!
This is the wall where the head of our bed goes. On the opposite side is the bathroom, scene of the aforementioned sledge hammer swinging.
Wainscoat Wonderings
One thing I love about old houses in the woodwork. Someday I'd love a wood-panelled reading room complete with a fireplace and leather armchair.
Our house is from the craftsman era, but doesn’t have a lot to offer in terms of interior woodwork. At 900 sft, it doesn't really offer much in terms of library space either.
For our bedroom project I’d like to do something that adds dimension and sure up our old walls a bit. The solution? Wainscoating.
Wainscoating is woodwork that covers a substantial portion of the actual wall itself. This Old House did a great primer on wainscoating. You can find it HERE.
I’m going to go with board and batten style in order to add some drama to the room. This usually requires a substantial amount of labor and carpentry. So, naturally, I’m looking for a way to cheat and achieve the same look and function. I found this site, which provides a great technique to do just that. In addition, I really like to color and look of the room. I think we may have just found our remodel inspiration!
Our house is from the craftsman era, but doesn’t have a lot to offer in terms of interior woodwork. At 900 sft, it doesn't really offer much in terms of library space either.
For our bedroom project I’d like to do something that adds dimension and sure up our old walls a bit. The solution? Wainscoating.
Wainscoating is woodwork that covers a substantial portion of the actual wall itself. This Old House did a great primer on wainscoating. You can find it HERE.
I’m going to go with board and batten style in order to add some drama to the room. This usually requires a substantial amount of labor and carpentry. So, naturally, I’m looking for a way to cheat and achieve the same look and function. I found this site, which provides a great technique to do just that. In addition, I really like to color and look of the room. I think we may have just found our remodel inspiration!
Wednesday, November 17, 2010
Wednesday Widget
Yes, I admit it, I like to borrow tools, especially from my dad. And yes, again readily admitted, I'm reluctant to give anything back until threatened with bodily harm. Well, this Wednesday's Widget falls into this category. And it truly has become something
I can't live without.
Since this is a blog post is one of admissions, I'll admit to being a bit afraid of ladders. Generally, I find myself avoiding projects that involve spending an extended amount of time up in the air. Granted, I will do the obligatory gutter cleaning and Christmas light-hanging as needed. But in this cases, and if you're going to go anyway, why not go in electrified blaze of holiday cheer?
I (acquired) a Pro-Series 4ft Scaffold to first do some ceiling repair in the living room. In this case, repair meant tearing out all of the 1x1 foam ceiling tiles that hung in all their stained and cigarette smelling glory, and replacing them with a standard ceiling. From there, I used it to paint every other room in the house, hang crown moulding, and paint the bottom half my house's exterior to avoid - you guessed it - spend any more time on the ladder than absolutely needed.
There's a couple of things I really like about this tool. First, you can cover a fairly large work area without having to reposition the scaffold. In this case, walking the plank is actually working in your favor. Second, both steps can be set at the same height to provide a large workspace. In addition, although it's not shown in this stock picture, my model has a pop out tray for paint and tools that becomes quite handy. Finally, it does provide a good place to take a rest when all the other furniture has been cleared out of a room.
This is really something that can be used in almost any total-room project. It folds up and stores in a fairly small space, although it does take some effort to stop it from shifting when stored at first. In addition, it's a little bulky to carry and one of my wheels always falls off when I pick it up. But, in comparison to its usability, these burdens are small.
The only thing that's really missing is a cup holder.
At $80 it is well worth every penny that somebody else paid for it.
I don't think dad is getting this one back any time soon.
I can't live without.Since this is a blog post is one of admissions, I'll admit to being a bit afraid of ladders. Generally, I find myself avoiding projects that involve spending an extended amount of time up in the air. Granted, I will do the obligatory gutter cleaning and Christmas light-hanging as needed. But in this cases, and if you're going to go anyway, why not go in electrified blaze of holiday cheer?
I (acquired) a Pro-Series 4ft Scaffold to first do some ceiling repair in the living room. In this case, repair meant tearing out all of the 1x1 foam ceiling tiles that hung in all their stained and cigarette smelling glory, and replacing them with a standard ceiling. From there, I used it to paint every other room in the house, hang crown moulding, and paint the bottom half my house's exterior to avoid - you guessed it - spend any more time on the ladder than absolutely needed.
There's a couple of things I really like about this tool. First, you can cover a fairly large work area without having to reposition the scaffold. In this case, walking the plank is actually working in your favor. Second, both steps can be set at the same height to provide a large workspace. In addition, although it's not shown in this stock picture, my model has a pop out tray for paint and tools that becomes quite handy. Finally, it does provide a good place to take a rest when all the other furniture has been cleared out of a room.
This is really something that can be used in almost any total-room project. It folds up and stores in a fairly small space, although it does take some effort to stop it from shifting when stored at first. In addition, it's a little bulky to carry and one of my wheels always falls off when I pick it up. But, in comparison to its usability, these burdens are small.
The only thing that's really missing is a cup holder.
At $80 it is well worth every penny that somebody else paid for it.
I don't think dad is getting this one back any time soon.
Sunday, November 14, 2010
And We're Off!!
I started putting up plaster washers today....
... and it kind of reminds me of my 7th grade class photo. Is this project going to work, or did I just give our bedroom a case of home remodeling acne?
A few notes on the washers: They were generally easy to install. I followed the cracks up the walls all around the room, and found myself going at a pretty good pace. I did, however, miss the lathe behind the wall a number of times. I did notice that if the washer dimpled, it meant it was firmly in the wall. No dimple - no lathe, and time to re-adjust.
... and it kind of reminds me of my 7th grade class photo. Is this project going to work, or did I just give our bedroom a case of home remodeling acne?A few notes on the washers: They were generally easy to install. I followed the cracks up the walls all around the room, and found myself going at a pretty good pace. I did, however, miss the lathe behind the wall a number of times. I did notice that if the washer dimpled, it meant it was firmly in the wall. No dimple - no lathe, and time to re-adjust.
Project Musing
I never really plan a project from start to finish. Well, I should say that I never stick to the same plan from start to finish. I often do one step, then find myself staring into a room looking for new possibilities. Does anyone else do this or is it just me?
There were two things I noticed when I started to get to work on this project:
There were two things I noticed when I started to get to work on this project:
- Our bedroom wall had cracks everywhere. I'm fairly certain that I'm dealing with the original 1920's plaster in the entire room. I think the room must have been wallpapered for much of the home's life. In the places that are really cracked (read: pieces falling off the wall), there are only two coats of paint. The first coat is -you guessed it- the same off-white wonder that coats the rest of the house. I have the remainder of this jug in the basement. The topcoat is the green we painted our room when we first moved in.
- I really don't like the green paint anymore. Combined with the brown curtains, it gives off a bit of a cave feeling.
Thursday, November 11, 2010
And So, A New Project Begins
The idea of starting a new project in the bedroom was very exciting. Unfortunately, no one at Home Depot or Lowes actually knew what a plaster washer was, desipte the assurance of the experts in the previos two posts.
In one exchange, an employee told me that they didn't carry plaster washers. I informed him that This Old House told me that I could purchase plaster washers at ANY local hardware store. At that point, he told me that he thought they were in garden section and made off in the opposite direction.
After a 5 store trips, I was frustrated. Was I searching for the sasquach of home repair widgets? Is there a fictional projects tab on thisoldhouse.com that I didn't notice? No. Plaster washers, like the sasquach are out there. You simple have to either: persistently search high and low; wait patiently in one spot with a grainy 1980's video camera; or drive your wood-paneled station wagon reckless through the woods of washington state. Lacking both a video camera and a wood-paneled station wagon, I chose the first option.
The fact is that plaster washers are in EVERY Home Depot and Lowes (thanks, garden center boy), but no one knows they're there. Simply read the front of every single box in the nails/screws and aisle and you just might get lucky. Most likely, their either in the corner of the shelf just above your left foot or in a dusty box just above eye level. But, if you keep returning week after week.....
In one exchange, an employee told me that they didn't carry plaster washers. I informed him that This Old House told me that I could purchase plaster washers at ANY local hardware store. At that point, he told me that he thought they were in garden section and made off in the opposite direction.
After a 5 store trips, I was frustrated. Was I searching for the sasquach of home repair widgets? Is there a fictional projects tab on thisoldhouse.com that I didn't notice? No. Plaster washers, like the sasquach are out there. You simple have to either: persistently search high and low; wait patiently in one spot with a grainy 1980's video camera; or drive your wood-paneled station wagon reckless through the woods of washington state. Lacking both a video camera and a wood-paneled station wagon, I chose the first option.
The fact is that plaster washers are in EVERY Home Depot and Lowes (thanks, garden center boy), but no one knows they're there. Simply read the front of every single box in the nails/screws and aisle and you just might get lucky. Most likely, their either in the corner of the shelf just above your left foot or in a dusty box just above eye level. But, if you keep returning week after week.....
EUREKA!!
Saying "No" to Crack Isn't as Easy as Nancy Reagan Would Leave You To Believe
Apparently, repairing substantially damaged historic plaster is kind of a big deal.
The problem is, that stuff is expensive! In addition, it does really seem to cut down on the work. I still have to drill in the wall and then follow-up with the standard plastering process.
Instead I chose to go old school TOH: LINK
The problem is, that stuff is expensive! In addition, it does really seem to cut down on the work. I still have to drill in the wall and then follow-up with the standard plastering process.
Instead I chose to go old school TOH: LINK
Break on Through to the Other Side... Accidentally
Sometimes I get sudden bursts of motivation. No one knows when they'll come or what they'll lead to, but come they do. One such burst led me to break out all of my favorite bathroom cleaning chemicals, and head into the tub to give the tiles a good scrubbing.
Well that scrubbing led me to discover that part of our wall was a little, well, squishy. That led me to pop out a tile, which led me to tearing out a 1' x 1' section of wall. That led to the shower stall being gutted. And since I was gutting, so went the floor, mirrors, light fixtures, and the vanity. This led to showering at my parents' house for five weeks...and- eventually- a new bathroom.
But this is not a post about our bathroom (more to come one that some other time): this is a post about consequences. And the consequence of getting way too excited about swinging a sledge hammer are as follows:
Well that scrubbing led me to discover that part of our wall was a little, well, squishy. That led me to pop out a tile, which led me to tearing out a 1' x 1' section of wall. That led to the shower stall being gutted. And since I was gutting, so went the floor, mirrors, light fixtures, and the vanity. This led to showering at my parents' house for five weeks...and- eventually- a new bathroom.
But this is not a post about our bathroom (more to come one that some other time): this is a post about consequences. And the consequence of getting way too excited about swinging a sledge hammer are as follows:
- Chunks of tile fly off the wall like shrapnel in a Bruce Willis movie and hit you in the face (no matter what you saw in Die Hard, shrapnel hurts, and
- The sledgehammer passes through the wall you actually want to break down, and hits the back of the 90-year-old lathe and horsehair plastered wall of your bedroom
Subscribe to:
Posts (Atom)