As part of our kitchen/dining room remodel, we lost the space where my wife's cookbooks used to be stored. She's a great cook and probably has more cookbooks than most town libraries. Needless to say, it was in my best interest to get this plethora of palatable print back into easily-accessible circulation. So, I began looking for bookcases to fill a 24 inch wide section of wall in our dining room.
What I quickly discovered: built-in bookcases are ridiculously expensive and tall store-bought bookcases are usually 30-plus inches wide. After spending so much time, energy, and money making our new rooms look fantastic, I was reluctant to investigate lower end products. When I say I was hesitant to go to Ikea, despite the wonderful smell of cinnamon buns and my desire to eat myself into a Swedish-meatball-induced coma, I mean I was really, really hesitant. At one point, I think I noted that under no circumstances would Ikea be part of this project. Well, I lied.
It turns out that Ikea is the only place that sells at 95 inch tall bookcase - the Billy with an extensions - that would fit in the space I wanted. After reading Ikea Hackers for years, I knew I could somehow work with this. My solution? The Built-In-Billy hack.
Here's a step-by-step of the project.
First: Assembly Billy. A subset of this step would be to create fictional arguments with the Ikea directions caricatures when you can't tell the difference between part 6780943 and 6780942, both of which are screws that look exactly the same in the picture but in reality are an inch apart in length.
Second: Mind the gap. In this space, I had baseboard that I did not want to pull out because it went below the original hardwood flooring. Instead, I took a piece of 1x2 strapping to fill the gap that would be created between the bookcase and the wall.
Third: Secure Billy to the wall. Since this is a corner, I secured both the back and the side of the bookcase, ignoring the holes for now.
Fourth: Size and install crown and baseboard. I'm not going to lie: this took a really long time, especially the crown molding. After a number of attempts, I was able to use by miter saw to come up with the 4 corner joints this project required.
Fifth: Plaster. Here's the fun part. I used drywall plaster to fill the joints between the bookcase and the wall, as well as between the regular bookcase and the extension unit. I then used plaster to fill in all of the adjustment holes and the underside shelf mounting bolts.
Sixth: Sand. I used sanding pads to smooth the plaster.
Seventh: Paint and repeat. I applied two coats of high-gloss white paint (the same as on the molding in the rest of the room) to the entire bookcase, baseboard, and crown. The end result is a bookcase that looks like it was custom built for the space. The cost $59 using wood, paint, and plaster I had left over from the rest of the project.
Showing posts with label Bungalow. Show all posts
Showing posts with label Bungalow. Show all posts
Saturday, April 28, 2012
Putting Billy in the Corner
Labels:
billy bookcase,
bookcase,
Bungalow,
dining room,
DIY,
Ikea,
ikea hack
Tuesday, April 24, 2012
Now You See It
When space is at a premium, rooms should only contain what's essential for look and function. That means making every attempt to get rid of furniture and other items that clutter a room. For me, that meant getting rid of a door leading to nowhere.
In my last post, I removed an old door and casing from a closet that was transformed into a fridge nook in the neighboring kitchen. Generally, I would never remove a closet from a bedroom. Luckily, this one had two, and it gave the opportunity to add a lot of space in the kitchen. Now that the old door casing is gone, it's time to make that spot look like just any old wall. That's right: this is a case of "now you see it, now you don't."
Step one is to put in some soundproofing/insulation (blocking out the refrigerator noise on the other side of the wall). Then it's time to put in some 2x4's in order to hang the drywall. I used a miter saw to cut the stud.
In my last post, I removed an old door and casing from a closet that was transformed into a fridge nook in the neighboring kitchen. Generally, I would never remove a closet from a bedroom. Luckily, this one had two, and it gave the opportunity to add a lot of space in the kitchen. Now that the old door casing is gone, it's time to make that spot look like just any old wall. That's right: this is a case of "now you see it, now you don't."
Step one is to put in some soundproofing/insulation (blocking out the refrigerator noise on the other side of the wall). Then it's time to put in some 2x4's in order to hang the drywall. I used a miter saw to cut the stud.
Hanging the drywall was pretty easy because, after all, we're only dealing with rectangles here. One small issue: the width from the stud to the outside of the wall. Like many old houses, our walls are made of horsehair plaster. Today, this is obviously no longer used. In addition, I have not been able to find drywall that matches the width of our walls. The solution? Add 1/4 wood strips over the existing wall studs to bridge the gap. This is a trick I've used on a number of projects.
With the drywall up, it's time for plaster. The process: plaster, sand; plaster, sand; and plaster, sand. The third time is the charm. One thing to note: add more mud (width and thickness) than you think you need.
By now you can see we're shifting from red to yellow. I'm still wondering what it was the drove us to pick this terrible color red, but that a topic for another blog. Repainting is a good time to review the walls for imperfections and fill them with plaster.
By now you can see we're shifting from red to yellow. I'm still wondering what it was the drove us to pick this terrible color red, but that a topic for another blog. Repainting is a good time to review the walls for imperfections and fill them with plaster.
Subscribe to:
Posts (Atom)